Joyetech penguin suit measurements

Packaging appearance image is simple and honest cute penguins. We can see the style of the suit.
joyetech atopack penguin
The kit contains ATOPACK atomizer, 0.6 Ω atomizing core, 0.25 Ω atomizing core, drip nozzle cover, smoke bombs silicone cover, USB charging line, manual, warranty cards, warning card.

Penguin box mod size: 52 MM * 26.5 MM * 102.5 MM, weight: 140 grams, built-in battery capacity: 2000 ma. Two materials PETG and silicone are adopted in oil tank. The box mod adopted zinc alloy material, so the weight was also greatly reduced. It looks round abe affluent.
joyetech atopack penguin
The ignition key is a coin size. Ignition key reaction is ringing. Below the ignition key are five small white lights, which is used to observe electricity. Under that is the USB charging interface.

Two pieces of metal electrode at the bottom of the oil tank directly connect to atomization core. The base use gold plating getting better connected to the electrode. On the back, the metal card buckles better connected to the smoke bomb will not fall off easily.
joyetech atopack penguin
Drops of the mouth is comfortable. On the side we can see smoke oil capacity is 8.8 ML. When you take it out, there is no need to add oil. Very convenient!
On the other side can also indicate their smoke of oil and composition (write) by yourself.

Penguin is equipped with two paragraphs, 0.6 Ω and 0.25 Ω atomizing core, taking the big smoke route, and atomizing core design is very unique. The advantage is that directly the condensate go back into the atomization for secondary atomization. You don’t have to worry about too much leakage.

Penguin has a clear positioning: convenient to carry, very suitable for beginners who do not have to understand all kinds of complicated data!
The host offers a variety of colors. If you have interests, you can look for it on urvapin.

Best Seller:
cheap vape deals
osub 80w baby
asvape michael mod
snowwolf vfeng

SMOK GX350

SMOK has been in the industry for many years delivering some of the best quality and renowned mods to the market and this time, it is proud to offer SMOK GX 350, which is gaining popularity due to its 4 battery configuration, extreme versatility, and incomparable design high wattage output. If you like to know more about SMOK GX 350, read below.

Available in four various color options, all of these have a zinc alloy construction. SMOK GX 350 provides an incomparable vaping experience. It features an ergonomic design, innovative firing button, compact design, and classy carbon fiber inlay. It has also a massive OLED display screen, a latched bottom compartment for batteries, and a USB port for firmware upgrades in the future. This kit may be powered by 2 or 4 18650 batteries that you need to buy separately from the kit. Once powered by 2 batteries, it may reach 220W of power while with 4 batteries, you can boost it to 350W of power.

smok gx350
Just like majority of mods in the market today, SMOK GX 350 also offers temperature control options, which enable you to range from 200 to 600 degrees. Some renowned features of SMOK GX 350 includes short-circuit protection, puff monitoring system, low battery warning, overheating protection, and twelve second cut off.

SMOK GX 350 has an elegant, ergonomic design with contours that makes this perfect. Its solid and compact nature makes this unparalleled. No mod device looks much better compared to SMOK GX 350. It also has a variable wattage that starts from 6W-350W. This exceptional range of power output provides users an excellent vaping experience without resistance that is frequently encountered with the premade coil head.
smok gx350
The device’s temperature control is extremely accurate. Some temperature features include temperature sensor and temperature limiting options. This allows the user to customize the vapor’s temperature, permitting cooler or warmer clouds of vapor, depending on your personal preferences. If the temperature control is your main consideration when purchasing vape mods, SMOK GX 350 will offer you better experience without scorching and dry hits. Its TFV8 tank perfectly fits the device and this is a much better option compared to TFV4 tank.

Best Seller:
Cheaping Vape Deals
Limitless LMC 200W TC Box Mod
iJoy Captain PD270
VOOPOO DRAG 157W TC Box
Limitless Arms Race LMC 200W

Fashionable brand in vape——ASVAPE MICHAEL BOX

The first time I got ASVAPE MICHAEL BOX, its appearance gave me the concept – fashionable brand.

The illustration at the surface of ASVAPE MICHAEL BOX gives you the best touch feeling. The illustration without deliberate protection didn’t scratch or chip with ten day’s use. This may not prove that this illustration design is wear-resisting, at least it is not so fragile.

asvape michael box mod
The ASVAPE MICHAEL BOX is equipped with a manual in it. There is very detailed operating and parameter.
Through the visual impact of the illustration, collocation with golden sand blasting metal frame, we can find the overall color of ASVAPE MICHAEL BOX is full of OLD SCHOOL style.

asvape michael box mod

Powered by double 18650 battery, the ASVAPE MICHAEL BOX is not too heavy even after installing batteries. It’s volume is 60 * 28 * 91.5 MM, which is larger than most of the same kind in the market. Many vapers may mention why not make it smaller? Actually after touching the radian and the rubberized surface, you will say it feels good and comfortable in hand.

The workmanship and texture of the bottom heat emission holes and the delicate ignition key can be clearly seen from the pictures. The 510 interface has a number of grooves and the ASVAPE logo around it.

Through the radian, pressing down on the ignition key makes you feel full, and the ignition key feedback also let a person feel very comfortable. It supports 24 mm atomizer perfectly. The max 200 w output, for most atomizer is suitable.

You just need to press and push to open the battery cover. Inside the tube, there is insulating layer and spring-loaded gold-plated electrodes. The workmanship and texture has a strong persuasion.

ASVAPE MICHAEL BOX‘s appearance, design, detail makes s person feel satisfied. With such perfect “shell”, it adopts the well-renowned VO200 chipset.
From a variety of experience, ASVAPE MICHAEL BOX is not only win by appearance. With features of independence, originality and individuality, taste, and attitude, I prefer to call it a fashionable brand which gives consideration to both appearance and strength in vape. If you have interests, you can go on Urvapin to buy it.

Best Seller:
Cheaping Vape Deals
Wismec RX GEN3 Kit
SMOK T Priv Starter Kit
Asvape Michael 200W TC Box Mod Devils Night

Eleaf iStick Pico 25 85W TC Starter Kit

The Eleaf iStick Pico 25 85W TC Starter Kit is a compact single 18650 (sold separately) powered box mod paired with the Eleaf Ello 25mm Sub-Ohm Tank. The iStick Pico 25 features a three piece body design, a 85W chipset with full TC support, and fits atomizers up to 25mm in diameter. The Ello 25mm Sub-Ohm Tank features an expandable tank section, allowing users to use the compact size for 2ml capacity or the extended size for 4ml capacity; a sliding top fill system; two different drip tips; and uses the HW series coils.

iStick Pico 25 85W TC Features:
1 to 85W Power Output
0.1 to 3.5 ohm Atomizer Resistance Range
Bypass Mode Feature
Firmware Upgradeable
Full Temperature Control Output
Ni200 Nickel Support
Titanium Support
Stainless Steel Support
Three Memory TCR Mode
Set Own Temperature Coefficient of Resistance
Fine Tune Output
0.05 to 1.5 ohm Atomizer Resistance Range
200 to 600 degrees Fahrenheit Range
Ultra Compact Form Factor
48mm by 25mm by 70mm
0.91″ OLED Screen
Battery Life Indicator
Output Wattage/Temperature
Output Amps
Atomizer Resistance
Single 18650 Powered
Top Loaded
Battery Not Included
Micro USB Charge Port
2A Max
Three Button Operation
Oversized Firing Button
Bottom Button Adjustment
Spring Loaded 510 Connection

Product Includes:
One iStick Pico 25 85W TC Box Mod
One Ello Sub-Ohm Tank
One HW1 0.2 ohm Coil
One HW2 0.3 ohm Coil
One 4ml Glass Segment
One Chimney Extension
Micro USB Charging Cable
User Manuals

The iStick Pico 25 85W TC Starter Kit, with its compact and stylish design, convenient retractable top fill Ello 25mm Sub-Ohm Tank, and upgradable firmware, makes this kit a great choice for all vapers. If you want to buy one, you can look for it on urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

85W iStick Pico 25 box mod

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W. The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

The iStick Pico 25 can handle various tanks up to 25mm diameter. With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly. The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you. Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest. The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging. The 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

Eleaf 85W iStick Pico 25 box mod Features & Spec:
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Eleaf 85W iStick Pico 25 box mod Package:
1 * iStick Pico 25 (without battery)
1 * QC USB Cable
1 * User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 Box Mod Starter Kit Preview

Coming soon from Eleaf is another in the now famous Pico line of very small, single 18650 cell, moderate wattage box mods and a sub-ohm tank. The sub-ohm tank this time is the ELLO Tank, with two coil heads included in the box.

The iStick Pico 25 features 0.91-inch screen with a bright and clear interface, 2A quick charge capability and its firmware upgradeable. It has the preheat function found in most Eleaf/Joyetech/WISMEC mods, but this time it’s in a compact PICO size package. Colors available will be Red/Black, Light Blue/White, Lime Green/White, and Stainless/Black.

The Eleaf iStick PICO 25 is powered by single 18650 battery, with a maximum power of 85W. The Kit comes with the ELLO Tank, but the mod itself can handle any tank up to 25mm diameter.

The ELLO atomizer features the new HW coil for supposedly good flavor, plus a retractable top cap for easy fill slots. For all intents and purposes, this is a throwback to the original Pico style box mod, with an upgraded chip, 85W of power, and a new, low resistant ELLO Sub-Ohm tank as a part of the kit.

Features of the iStick Pico 25:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)

Eleaf iStick Pico 25 with ELLO Full Kit comes with
1x iStick Pico 25 (without battery)
1x ELLO Atomizer
1x HW1 Single-Cylinder 0.2ohm Head
1x HW2 Dual-Cylinder 0.3ohm Head
1X QC USB Cable
2x User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

Steps on how to put logo in the mod:
a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.
b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.
c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.
d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.
e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Fashionable Brand in Vape——ASVAPE MICHAEL BOX Mod

The first time I got ASVAPE MICHAEL BOX, its appearance gave me the concept – fashionable brand.

The illustration at the surface of ASVAPE MICHAEL BOX gives you the best touch feeling. The illustration without deliberate protection didn’t scratch or chip with ten day’s use. This may not prove that this illustration design is wear-resisting, at least it is not so fragile.

The ASVAPE MICHAEL BOX is equipped with a manual in it. There is very detailed operating and parameter.

Through the visual impact of the illustration, collocation with golden sand blasting metal frame, we can find the overall color of ASVAPE MICHAEL BOX is full of OLD SCHOOL style.

Powered by double 18650 battery, the ASVAPE MICHAEL BOX is not too heavy even after installing batteries. It’s volume is 60 * 28 * 91.5 MM, which is larger than most of the same kind in the market. Many vapers may mention why not make it smaller? Actually after touching the radian and the rubberized surface, you will say it feels good and comfortable in hand.

The workmanship and texture of the bottom heat emission holes and the delicate ignition key can be clearly seen from the pictures. The 510 interface has a number of grooves and the ASVAPE logo around it.

Through the radian, pressing down on the ignition key makes you feel full, and the ignition key feedback also let a person feel very comfortable. It supports 24 mm atomizer perfectly. The max 200 w output, for most atomizer is suitable.

You just need to press and push to open the battery cover. Inside the tube, there is insulating layer and spring-loaded gold-plated electrodes. The workmanship and texture has a strong persuasion.

ASVAPE MICHAEL BOX‘s appearance, design, detail makes s person feel satisfied. With such perfect “shell”, it adopts the well-renowned VO200 chipset.

From a variety of experience, ASVAPE MICHAEL BOX is not only win by appearance. With features of independence, originality and individuality, taste, and attitude, I prefer to call it a fashionable brand which gives consideration to both appearance and strength in vape. If you have interests, you can go on Urvapin to buy it.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Mechanical Output Experience – Tesla Terminator Starter Kit Review

Now electronic cigarette equipment in orde to gain the best taste from minor adjustment design complex operating system and function. And in order to provide bigger power, battery usage has been increasing, and big size and weight. But complex operation is a high threshold for the novice friends (especially a lot of equipment without Chinese instruction),and bigger size makes a lot of people turn to small size and simple mechanical operation equipment.

We this time bring you a single electrical machanical box mod, with lighter weight and small volume, and half mechanical and one key operational mode.

It is from “half machinery expert” tesla terminator half mechanical suit.

Tesla changed consistent square packing style. This time it use the paper tube packaging, with host X1, atomizer X1, cable X1, atomizer and box mod instructions, atomizing core X1, accessories, glass storehouse package X1, warning card X1, and the certificate of approval X1.

Box mod parts: 80 mm * 36.5 mm * 22 mm of small volume, with fruity line, feeling very comfortable.

No scratch-resistant disk around the top 510 interface, it is very easy to scratch when installing atomizer. At the left bottom is light, below it is the brand LOGO, and right below is the USB charging port. At the bottom is output parameters and charging parameters of products. Word TERMINATOR stamps on the back of the battery, and at the top add antiskid bulge.

Atomizer parts: atomizer is 22 mm in diameter, black mouth, shape of slope steps, brand LOGO and TERMINATOR is on the roof, can see resistance and recommended power on atomization core through tank.

Small and light, the fuselage feels very comfortable. One key operation mode is simple and without difficulty. The light is rich in function. It has excellent security and support the quick charge.

This Tesla Terminator Starter Kit is very suitable for new users with good cost performance and good performance of the taste and smoke.

So if you are not exposed to electronic cigarettes, or want to experience the unique experience, and are bored with tedious operation, the tesla terminator suit is a good choice.

https://www.urvapin.com/

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/smoant-charon-218w-zinc-alloy-tc-box-mod.html

Continuous innovation – CoilART AZEROTH RTA experience

Innovative spirit, in the field of electronic cigarette, never stop. No matter on the box mod, in the atomizer, even in smoke oil, it is not hard to find all kinds of new device.

Today, we introduce the atomizer, AZEROTH RTA. AZEROTH RTA’s biggest innovation, is to join the triple coil deck popular RTA type atomizer. So what kind of experience it will bring us?

Simple packaging, its content is very rich also. In addition to AZEROTH RTA subject, there are double coil deck, resin roof, yellow ring, T word screwdriver, spare parts and cue CARDS.

AZEROTH RTA structure and common RTA type atomizer have no big difference. It is broadly divided into one-piece top drip nozzle (metal/resin), one-piece oil baffle even atomization, electrode deck (3/2 coil), as well as the one-piece inlet adjustment base.

One-piece head cover is connected with oil partion by thread.Metal top drip nozzle’s hole diameter is similar to 810 drip nozzle, which meets demand of the players to play big smoke. Resin roof will be smaller in diameter, and is similar to the conventional 510 drip nozzle. Two drip nozzle have a small slope design, which effectively prevent condensate drawing into the mouth.

Supporting oiling at the top, AZEROTH RTA is equipped with one-piece oil separator and engraved with CoilART mage LOGO on atomizationstorehouse. Atomization warehouse has design of gathering, which can prompt strong degree of smoke, also effectively prevent condensation “climbing” into mouth.

After assemble the glass cover, AZEROTH RTA has plenty of 4.5 ML of oil reserves. AZEROTH RTA’s most distinctive design is triple coil deck. The entire deck adopts the technology of the gold-plated, conductive lays a sound foundation of construction.

Connected with the three electrode columns in the center of the deck, the three electrodes correspond with the anode of three heat wire.

The three electrodes connected to the deck correspond with three negative heat wire.

Triple coil deck has three air inlet at the bottom. Air inlet opening is big enough, guarantee in 3 cases, can have enough air inflow.

Triple coil deck innovation on AZEROTH RTA, no matter on the palate, or on the density of smoke, has very good performance. Is enough to cope with high oil consumption. Although triple coil deck does have some difficulty for beginner. Players can also meet needs and hands-on ability, by choosing triple or double coil deck. If you like full-bodied palate, you might as well try this atomizer.

https://www.urvapin.com/

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/smoant-charon-218w-zinc-alloy-tc-box-mod.html