The new Smoant Pasito did not come as a surprise in the vaping market, since almost all manufacturers rushed to catch up with Lost Vape Orion . Indeed, the guys from Lost Vape set a certain trend in creating a new format of POD-systems, and this form factor clearly appealed to users. Smooth Pasito has a fundamental difference that we saw in the previously reviewed devices – here it is possible to install an RBA base on 1 helix, which automatically gives a certain versatility to the device.
Pasito mod, Pasito cartridge, charge cable, MTL Ni-80 Coil 1.4 Ohm evaporator, DTL Mesh Coil 0.6 Ohm evaporator, certificate of originality, warranty card.
Height: 102 mm;
Width: 38 mm;
Thickness: 18 mm.
Supported power: from 10 to 25 W,
Output voltage: from 3.2 to 4.2 V,
Cartridge volume: 3 ml,
Supported resistance: from 0.3 to 3.0 Ohm,
Maximum charge current: 5 V / 1 A,
Battery capacity: 1100 mAh.
The cartridge is made of dark translucent plastic. Due to the large window to track the level of the liquid is not inconvenient.
On top is a drip-type of epoxy resin, which is made in the form of nozzles. It is held on a metal lid with two orings.
When unscrewing the lid itself, users open a refueling hole. The diameter of the slot is small, so with some pipettes you have to refill more carefully. The cartridge holds 3 ml of fluid.
Also on the side of the upper platform there is a slide for adjusting the blowing.
For this tank, the manufacturer presented not only two types of replaceable evaporators: MTL Ni-80 Coil 1.4 Ohm and DTL Mesh Coil 0.6 Ohm, but also a special RBA base for one spiral.
It is recommended to set the winding in the range from 0.5 Ohm to 1.0 Ohm. The vaporizers are screwed onto the base, which is held in the tank with the help of o-rings. Fastening to fashion is due to a pair of magnets.
The mod is made of a special aluminum alloy (the manufacturer calls it Space Aluminum). Four colors are currently available: Classical Red, Bronze Blue, Carbon Black, Gun-metal.
On the side are the Fire button, the power mode change button, the USB type C port for charging. The charge LED is located on the side panel called Smoant.
For work, users are available 5 power modes: 10, 13, 16, 20 and 25 watts. Switching occurs when you press a special button.
The mod works with resistances from 0.3 to 3.0 ohms. The battery capacity is 1100 mAh, charging of which with a current of 1 A should take about 1.5 hours.
The indicator consists of 5 separate lights: with a charge of 80-100, all five will light, from 60 to 80 four, and so on, up to one light with a charge less than 20%.
Reflections on the device
In general, you can predict the success of Pasito. Unlike its competitors, among which you can pay attention to GeekVape Frenzy Pod Kit , OneVape Golden Ratio , Smok Trinity Alpha , Pasito has the ability to install an RBA-base, which the manufacturer offers as an additional option. This is the versatility and the ability to customize the usual POD-system , most likely to appeal to fans of electronic steam.
Now It’s Available: Smoant Pasito Vape Pod Kit
Hot Sale Recommendation:
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html