After a short break, Vapefly is back in business. And the most pleasant thing for me personally is that they again began to work for what they can do, namely mtl atomizers. I think no one will argue that in the budget segment of this direction, they earned a decent credit of trust from brand fans. Therefore, with genuine interest, I propose to start an acquaintance.
Case material: stainless steel Atomizer type
Height: 41.7mm with drip Connector type
:510, pin gold-plated
Color: see photo below
– Holic MTL RDA
– pre-wound helix 2pcs
– beauty ring (probably 24mm)
– key screwdriver
– hex key
– spare oring pin
– spare screws
– jib pin
– spare side blower nozzles
– user manual
I can’t keep quiet about picking – besides the owner will have everything to start with, so you’ve put something here for your soul. Here I was always interested in the question – for such a modest price tag in a box there is so much of everything, so what prevents other manufacturers from doing the same.
The exterior of our guest is quite decent – no vulgar decor is observed. Yes, the shape is very nice, even if the drip and tall with it. But offhand, we can say that the domed part is massive for a reason – it will be responsible for heat dissipation, and this, as you know, is a sore question in this segment.
Everything is standard with colors – the choice, as always, is decent from the start.
Drip type 510th, he made of Delrin. It is a bit strange that there is no extra in the box this time. He sits down in the dome, on the sides of which are located the ventilation adjustment holes.
And the location of the latter is asymmetrical – this is what we saw in their RDTA. It is a working constructive blowing, providing decent variability. On both sides, the holes were cut by the orings, which would prevent air from the outside in advance.
But the deck is already familiar to us, to the pain in the fingers, thank God, only the hands. This is me to the fact that the users of this constructive mass, since such a construct is unchanged for several new products of the manufacturer.
All the same two racks for correct fixation of one spiral. On the sides there are notches for centering the coil. For the airflow there is a small nozzle at the bottom and two on the sides, peeling at an angle from the deck.
As you remember, the latter have always been adjustable, so they did here. However, constructive changed, as for me, for the better. Now inside the half-turn rods with holes, with a “hint” applied to the slits for adjustment, therefore it will be possible to adjust the blowers identically on both sides. True, it seems to me that the air flow on the covered holes will smear a little, but here it is necessary to try – probably, the error will be insignificant.
The bath is not the deepest, and the developers offer us to bury the drip, each time removing the entire dome and knocking down the blowing setting. Well, it does not matter because the profile use of such gizmos on the skonk mods. Especially for this provided the appropriate pin.
Both pins are gilded and perform sufficiently.
The price is $ 27.99.
Now It’s Available: Vapefly Holic MTL RDA
Hot Sale Recommendation:
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html